With the technology developing day by day, LED lighting has rapidly taken its place in our lives thanks to its advantages and positive effects on the environment.

LED provides between 40% and 85% efficiency depending on the characteristics of the space and the product, as well as contributing to the environment and reducing maintenance costs.

Since the day it was founded, Dolunay Lighting has been designing LED lighting fixtures for spaces that require high levels of light. Dolunay Lighting conducts R&D studies of lighting products in order to take full advantage of the advantages of LED technology and to keep the lumen / watt efficiency at the highest level, LED technology is trying to increase the areas of use of technology.

LEDs emit heat during light production, but do not give off heat. The heat generated during the light production of the LED luminaire is absorbed by the heat sink inside the lamp. If a correct heat sink is not designed, the luminaire's light efficiency will decrease and its 50,000-hour lifespan will be shortened.

LED's Dolunay Lighting, which designs products to overcome the limitations of use at high wattages arising from its structural features, continues to be an alternative to conventional lighting by keeping the lumen/watt efficiency at maximum at high powers.

Dolunay Lighting continues its efforts to increase the usage areas of LED technology, which has a wide range of usage possibilities from factories to shopping malls, from stores to parking lots and environmental lighting.

LED The higher the wattage of the lamps, the more light they will give. If LED's If studies are not carried out to reduce the temperature generated by taking into account the structure, the desired values cannot be achieved in efficiency and life of the luminaire.

When choosing an LED lamp, the lumen value, which is the luminous flux value, should be considered, not the wattage value, which is the energy consumption value. The higher the lumen value of the selected lamp, the more light the LED lamp gives. The lumen value to be considered here LED not the lumen values of the chips, but the lumen values measured under their own operating conditions after the luminaire has been designed.

The lumen output of LED chips on their own decreases after the luminaire is designed. What is important here is that with continuous operation LEDs will be able to operate at maximum efficiency for long periods of time by minimizing the heat generated LED is to design luminaires.

Advantages of LED

• Provides a high level of savings
• Over 50,000 hours of operating life
• Emits low heat
• High light quality
• Safe
• High start-up speed
• Free of toxic compounds
• There is no 'Cooling Down Period'